Here is the placeholder text
Carbon fiber pre-oxidized yarn
Classification:
Key words:
Summary Introduction
Pre-oxidized fiber made from carbon fiber is an intermediate product in the manufacturing of high-performance carbon fiber. It is derived from organic precursors such as polyacrylonitrile (PAN) or viscose, and is the form of fiber after stabilization treatment. In the process of producing carbon fiber, the precursor fibers first undergo pre-oxidation treatment, which causes chemical changes within the fibers, forming an intermediate material known as 'pre-oxidized fiber.' The carbon content of pre-oxidized fiber is relatively low, and its mechanical properties are weaker, but compared to the original organic fibers, its thermal stability and dimensional stability have significantly improved.
Tel: +86 135 9774 9636 (Mr. Feng)
Message InquiryDetails Introduction
Pre-oxidized carbon fiber is an intermediate product in the manufacturing of high-performance carbon fiber, derived from organic precursors such as polyacrylonitrile (PAN) or viscose, which undergo stabilization treatment. In the process of producing carbon fiber, the precursor fibers first undergo pre-oxidation treatment, which causes chemical changes within the fibers, forming an intermediate material known as 'pre-oxidized fiber.' The carbon content of pre-oxidized fiber is relatively low, and its mechanical properties are weaker, but compared to the original organic fibers, its thermal stability and dimensional stability have significantly improved.
When the pre-oxidized fiber undergoes further carbonization and graphitization treatment, it forms the final high-performance carbon fiber, which possesses high strength, high modulus, low density, and good electrical and thermal conductivity.
When used in brake pads, pre-oxidized carbon fiber is typically not used directly but is processed into carbon fiber short cuts or carbon fiber composites. The main purposes of adding carbon fiber to brake pads are as follows:
1. Lightweight: Carbon fiber composites have a low density, which can significantly reduce the weight of brake pads, thereby benefiting the overall weight reduction of the vehicle, improving fuel economy and handling performance.
2. High wear resistance and stability: Carbon fiber has excellent wear resistance and fatigue resistance, allowing it to maintain good mechanical properties under extreme conditions as a brake pad material, extending its service life.
3. Good thermal stability and heat dissipation capability: Carbon fiber brake pads can maintain structural stability at high temperatures and have good thermal conductivity, which helps to dissipate heat quickly and reduce the risk of brake failure due to overheating.
4. Suitable friction performance: Brake pads made from carbon fiber composites can provide a relatively constant and moderate friction coefficient, ensuring the stability and reliability of the vehicle's braking system.
Therefore, in high-end models or situations with special requirements for braking performance, carbon fiber or its composites are widely used in the production of brake pads to achieve the goals of enhancing braking performance, durability, and driving experience.
Factory
Equipment
Inspection Report
SERVICE ADVANTAGES
Daye Jinpeng Friction Material Co., Ltd. was established in Daye City, evolving from the original Caojiawan wollastonite mine. The company has transitioned from a primary focus on wollastonite and copper mining to its current state of processing and selling metal and non-metallic ore powders, mineral fibers, and more.Upholding the company philosophy of "Accumulating Virtue, Preserving Integrity; Enjoying Dedication, Succeeding with Honesty," the company has established two brands, committed to creating the [Jin Peng] [SPAR] 2 brands, and is committed to focusing on providing exceptional service to our valued customers.
Company established in 2013
Plant area 5000 square meters
Large production machinery and equipment
More than 300 cooperative customers
Fully equipped and rich in resources
The company has a wollastonite, a copper mine. Daye has polymetallic mines (gold, silver, copper, iron, tungsten, antimony, etc.) and non-metallic resources (wollastonite, calcite, feldspar, quartz, bentonite, kaolin, etc.)
Professional team, strict quality inspection
The company combines a number of domestic institutions of higher learning, as well as the same industry processing, modification, composite materials. Actively carry out technological innovation, product upgrades, continuously improve the quality of the company's products, develop modified materials, composite materials, strictly require all aspects of production, and complete the ISO9001 certification.
Advanced technology, leading technology
Own 5R Raymong Mill 1 set. 4R Raymung Mill 2 sets, Longyan Yifeng Mill 998. Needle-like wollastonite powder impact mill, zircon media wet ball mill, continuous modification machine, grading screen and other equipment. Different content for you.
One-to-one service, one-minute response
Respect customers, understand customers, continue to provide products and services that exceed customer expectations, be customers forever partners, satisfy customers and reduce costs. Improve quality, have quality, the pursuit of sustained, is our duty.
RECOMMENDED PRODUCTS
MESSAGE INQUIRY
Welcome to leave a message, we will contact you in time!
Copyright©Daye Jinpeng Friction Material Co., Ltd.
This website supports IPV4 / IPV6 bidirectional access