PRODUCTS CENTER
Belgium Cellulose fiber
Category:
Tel: +86 135 9774 9636 (Mr. Feng)
Message InquiryProduct Description
Cellulose fiber is a natural organic fiber obtained through the high purification and mechanical processing of cellulose, a major component derived from plant cell walls. It is extracted from biomass resources such as cotton, wood, and bamboo using chemical or physical methods, and possesses good biodegradability, moisture absorption, heat resistance, and stable chemical properties. In industrial applications, cellulose fiber is widely used due to its high strength, moderate elastic modulus, and good tensile and impact resistance.
In the brake pad manufacturing industry, cellulose fiber is an important reinforcing and filling material, primarily serving the following functions:
1. Structural reinforcement:
• Cellulose fiber can increase the mechanical strength and wear resistance of brake pads, making them less prone to cracking and deformation under severe friction, thus maintaining good overall stability.
2. Control of wear and friction performance:
• Cellulose fiber helps to regulate the friction coefficient of brake pads, ensuring stable output of braking torque during the braking process, and can optimize wear characteristics through formulation design to extend the service life of the brake pads.
3. Noise and vibration absorption:
• Due to its good flexibility and sound-absorbing ability, cellulose fiber can effectively absorb and dissipate vibrations and noise generated during braking, enhancing the comfort of brake operation.
4. Improved thermal stability:
• Under high-temperature conditions, cellulose fiber can help dissipate heat, preventing brake failure due to overheating, and can maintain the dimensional stability of brake pads within a certain temperature range, preventing thermal degradation.
5. Environmental friendliness and cost-effectiveness:
• Compared to certain synthetic materials, cellulose fiber is widely available and renewable. Using it as a brake pad material is beneficial for environmental protection, and due to its relatively low cost, it can also help reduce the manufacturing costs of brake pads.
Therefore, cellulose fiber plays a key role in the friction materials of brake pads, meeting the performance requirements of automotive braking systems while aligning with the modern automotive industry's pursuit of sustainable development and green manufacturing.
Focus on us
Copyright©Daye Jinpeng Friction Material Co., Ltd.
This website supports IPV4 / IPV6 bidirectional access